MINING/TUNNELING (AtEx-permission group I)

Download PDF-catalogue

LED-LAMPS

KS-7700 LED helmet lamp

 

Cordless helmet lamp with Lithium accumulator and High-Power LED.
Illumination with six small emergency LED or main LED.
Minimum working time 14 hours with full light
Luminous flux 1500 lux in 1 m distance, illuminance at least 25 lumen.
Internal protective circuits prevent overload, deep discharge, wrong polarity and short-circuit
Shock resistant housing built from a special mixture of polycarbonate and ABS.
Waterproof for at least 1 m depth. Temperature range from -20 °C to +60 °C.
Completely free from maintenance. Weight of lamp only 130 g.
2 years warranty against material defect or dysfunction.
European permission for mining purposes Ex I M1 Ex ia I

KS-7700H2 LED helmet lamp

 

Cordless helmet lamp with Lithium accumulator and High-Power LED.
Illumination with six small emergency LED or main LED.
Minimum working time 14 hours with full light
Luminous flux 1500 lux in 1 m distance, illuminance at least 25 lumen.
Internal protective circuits prevent overload, deep discharge, wrong polarity and short-circuit
Shock resistant housing built from a special mixture of polycarbonate and ABS.
Waterproof for at least 1 m depth. Temperature range from -20 °C to +60 °C.
Completely free from maintenance. Weight of lamp only 130 g.
European permission for mining purposes Ex I M1 Ex ia I/II (H2)
Special permission for use in mines with methane and hydrogen.

KS-7710 high power LED helmet lamp

 

Cordless helmet lamp with Lithium accumulator and High-Power LED.
Illumination with six small emergency LED or main LED with two different powers.
Luminous flux with regular light 1500 lux in 1 m distance, illuminance at least 25 lumen.
Luminous flux with high power light 2500 lux in 1 m distance, illuminance at least 32 lumen.
Minimum working time 14 hours with full regular light
Minimum working time 5 hours with full high power light
Internal protective circuits prevent overload, deep discharge, wrong polarity and short-circuit
Shock resistant housing built from a special mixture of polycarbonate and ABS.
Waterproof for at least 1 m depth.
Temperature range from -20 °C to +60 °C. Completely free from maintenance. Weight of lamp only 130 g.
2 years warranty against material defect or dysfunction.
European permission for mining purposes Ex I M1 Ex ia I

KS-6700w warning signal lamp

 

Cordless warning signal lamp with Lithium accumulator and 10 colured wide-angel LED.
Illumination with flashing or permanent light with 10 or 4 LED coluored yellow or red.
Minimum working time 21 hours with flashing light, 14 hours with permanent light.
Caused by the transparent front part of the housing the light can shine in a wide angle.
Internal protective circuits prevent overload, deep discharge, wrong polarity and short-circuit
Shock resistant housing built from a special mixture of polycarbonate and ABS.
Waterproof for at least 1 m depth. Temperature range from -20 °C to +60 °C.
Completely free from maintenance. Weight of lamp only 120 g.
2 years warranty against material defect or dysfunction.
European permission for mining purposes Ex I M1 Ex ia I

KS-5700z train lamp

 

Cordless train lamp with Lithium accumulator and 9 LED, 5 of which are coloured and 4 are white.
Illumination with 4 red (or green) LED or 4 white LED.
Big advantage of this lamp is the extremely long working time 5.
With five red LED it will shine at least 24 hours with full light.
Caused by the transparent front part of the housing the light can shine in a wide angle.
Shock resistant housing built from polycarbonate (Makrolon ®).
Waterproof for at least 1 m depth.
Temperature range from -20 °C to +60 °C.
Completely free from maintenance. Weight of lamp only 140 g.
2 years warranty against material defect or dysfunction.
European permission for mining Ex I M1 Ex ia I

KS-5300 single charging device

 

Charging device for 100 V - 220 V primary voltage; apted for all cordless KSE-LIGHTS helmet lamps with Lithium accumulator.
Output: DC 5.1 V < 600 mA
Charging time: < 7 h
Indicating LED shows charging progress:
Red: loading in progress
LED flashing: charging is nearly complete
Green: charging is completed, charging power is cut off

KS-5010 12V single car charger

 

12 V single charging device for cars; apted for all cordless KSE-LIGHTS helmet lamps with Lithium accumulator.
Output: DC 5.1 V 500 mA

KS-5008 charging box

 

Charging box with 8 charging places; apted for all cordless KSE-LIGHTS helmet lamps with Lithium accumulator.
Well apted for use in cars or trucks with voltages of 12-24 V.
Of course it is also possible to use the charging box on the stationary power supply system.
Primary voltage: direct current 12-24 V or alternating current 90-265 V.
Power requirement: 40 W.
Weight: 2,5 kg. Dimensions: 350 mm wide, 250 high, 60 mm deep.
Each four places with separate charging control system.
The charging box is delivered ready for use and can be mounted on a wall or in a car.
2 years warranty.

KS-5536 small charging board

 

Charging board for 36 lamps; apted for all cordless KSE-LIGHTS helmet lamps with Lithium accumulator.
Each single charging place with separate charging control system.
Input: AC 230 V 50 Hz
Power requirement: 150 W.
Weigth: 12 kg. Dimensions: 700 mm wide, 550 high, 80 mm deep.
Charging helmetacity: 108 lamps/day.
The charging board is made for mounting at a wall.
Indicating LED shows charging progress:
Red: loading in progress
LED flashing: charging is nearly complete
Green: charging is completed, charging power is cut off

KS-5200 large charging board

 

Charging board for 200 lamps; apted for all cordless KSE-LIGHTS helmet lamps with Lithium accumulator.
Each single charging place with separate charging control system.
Input: AC 230 V 50 Hz
Power requirement: 400 W.
Weigth: 35 kg. Dimensions: 1050 mm wide, 1600 high, 200 mm deep.
Charging helmetacity: 600 lamps/day.
The charging board is made to put up.
Indicating LED shows charging progress:
Red: loading in progress
LED flashing: charging is nearly complete
Green: charging is completed, charging power is cut off

KS-5020 neckband

 

This lanyard allows carrying the lamp around one’s neck comfortabely.

KS-5050 safety band

 

Safety device against falling for cordless KSE-LIGHTS lamps.
The nylon band with safety relief is fixed at the lamp, then the safety band is passed through the cord loop on the helmet and fixed on the belt with snap link.
The safety band can the used as a neckband alternatively.

KS-5525 forehead band

 

The forehead band can be used in sorroundings where no helmets must be used.
Here it is possible to carry the lamp with forehead band. 

KS-5526 helmet ribbon

 

For helmets without holder for lamps. Here the adjustable helmet ribbon is pulled over the helmet and fixed on the rim with hooks within seconds.

1015 aluminium lampholder

 

Lampholder made from aluminium, together with rivets for mounting on a helmet.