FIRE BRIGADES / RESCUE FORCES / INDUSTRY (AtEx-permission group II)

Download PDF-catalogue

LED-LAMPS

KS-7600 LED helmet lamp

 

Cordless helmet lamp with Lithium accumulator and High-Power LED.
Illumination with six small emergency LED or main LED.
Minimum working time 14 hours with full light
Luminous flux 1500 lux in 1 m distance, illuminance at least 25 lumen.
Internal protective circuits prevent overload, deep discharge, wrong polarity and short-circuit
Shock resistant housing built from a special mixture of polycarbonate and ABS.
Waterproof for at least 1 m depth. Temperature range from -20 °C to +60 °C.
Completely free from maintenance. Weight of lamp only 130 g.
2 years warranty against material defect or dysfunction.
With AtEx-permission Ex II 2G Ex ib IIC T4 or Ex II 2G Ex ia IIC T3

KS-7610 high power LED helmet lamp

 

Cordless helmet lamp with Lithium accumulator and High-Power LED.
Illumination with six small emergency LED or main LED with two different powers.
Luminous flux with regular light 1500 lux in 1 m distance, illuminance at least 25 lumen.
Luminous flux with high power light 2500 lux in 1 m distance, illuminance at least 32 lumen.
Minimum working time 14 hours with full regular light
Minimum working time 5 hours with full high power light
Internal protective circuits prevent overload, deep discharge, wrong polarity and short-circuit
Shock resistant housing built from a special mixture of polycarbonate and ABS.
Waterproof for at least 1 m depth.
Temperature range from -20 °C to +60 °C. Completely free from maintenance. Weight of lamp only 130 g.
2 years warranty against material defect or dysfunction.
With AtEx-permission Ex II 2G Ex ib IIC T4 or Ex II 2G Ex ia IIC T3

KS-7650 superlight LED helmet lamp

 

Cordless helmet lamp with Lithium accumulator and High-Power LED.
Illumination with six small emergency LED or main LED.
Luminous flux 1200 lux in 1 m distance.
Minimum working time 7 hours with full light
Internal protective circuits prevent overload, deep discharge, wrong polarity and short-circuit
Shock resistant housing built from a special mixture of polycarbonate and ABS.
Waterproof for at least 1 m depth.
Temperature range from -20 °C to +60 °C. Completely free from maintenance. Weight of lamp only 115 g.
2 years warranty against material defect or dysfunction.
With AtEx-permission Ex II 2G Ex ib IIC T4 or Ex II 2G Ex ia IIC T3

KS-5300 single charging device

 

Charging device for 100 V - 220 V primary voltage; apted for all cordless KSE-LIGHTS helmet lamps with Lithium accumulator.
Output: DC 5.1 V < 600 mA
Charging time: < 7 h
Indicating LED shows charging progress:
Red: loading in progress
LED flashing: charging is nearly complete
Green: charging is completed, charging power is cut off

KS-5010 12V single car charger

 

12 V single charging device for cars; apted for all cordless KSE-LIGHTS helmet lamps with Lithium accumulator.
Output: DC 5.1 V 500 mA

KS-5008 charging box

 

Charging box with 8 charging places; apted for all cordless KSE-LIGHTS helmet lamps with Lithium accumulator.
Well apted for use in cars or trucks with voltages of 12-24 V.
Of course it is also possible to use the charging box on the stationary power supply system.
Primary voltage: direct current 12-24 V or alternating current 90-265 V.
Power requirement: 40 W.
Weight: 2,5 kg. Dimensions: 350 mm wide, 250 high, 60 mm deep.
Each four places with separate charging control system.
The charging box is delivered ready for use and can be mounted on a wall or in a car.
2 years warranty.

KS-5536 small charging board

 

Charging board for 36 lamps; apted for all cordless KSE-LIGHTS helmet lamps with Lithium accumulator.
Each single charging place with separate charging control system.
Input: AC 230 V 50 Hz
Power requirement: 150 W.
Weigth: 12 kg. Dimensions: 700 mm wide, 550 high, 80 mm deep.
Charging helmetacity: 108 lamps/day.
The charging board is made for mounting at a wall.
Indicating LED shows charging progress:
Red: loading in progress
LED flashing: charging is nearly complete
Green: charging is completed, charging power is cut off

KS-5620 adapter

 

With this adapter piece all lamp models of the KS-7 series can be fixed with a customary sidewise helmet holder on nearly every firefighter helmet.

KS-5630 holder with bracket

 

Holder with bracket. Best for fixing all lamp models on a jacket, a belt or a breathing apparatus.

KS-5020 neckband

 

This lanyard allows carrying the lamp around one’s neck comfortabely.

KS-5050 safety band

 

Safety device against falling for cordless KSE-LIGHTS lamps.
The nylon band with safety relief is fixed at the lamp, then the safety band is passed through the cord loop on the helmet and fixed on the belt with snap link.
The safety band can the used as a neckband alternatively.

KS-5529 adhesive lampholder

 

This lampholder is made of polycarbonate (PC) and is fixed on the helmet with a heavy duty adhesive tape. The adhesive tape is heat resitant up to 230 °C.

KS-5525 forehead band

 

The forehead band can be used in sorroundings where no helmets must be used.
Here it is possible to carry the lamp with forehead band.

KS-5526 helmet ribbon

 

Apted for many firefighter helmets without holder for lamps. Here the adjustable helmet ribbon is pulled over the helmet and fixed on the rim with hooks within seconds.

KS-5610 lampholder for aluminium helmets

 

For Aluminium Helmets like Schuberth F110, HPS4100 and similar
A new type of fixation of the lamp on the helmet, that uses he existing holes in the helmet.

Holder H50

 

Modified lampholder for Schuberth F210 helmet. Available for all lamp models.